News and information
News
29
2023
-
08
How to use the transparent column in the hotel decoration design
How to use the transparent column in the hotel decoration design
In the hotel design process generally through the empty column refers to the column closed, the two column ends are not closed virtual body. The paper card on the plane is formed by repeated bending and cutting, and then the upper and lower edges of the convex and concave plane are glued together to form a cylinder type with left and right penetration.
The transparent cylinder is divided into two types: transparent prism and transparent cylinder. Prisms include triangular prism, quadrangular prism, pentagonal prism, etc. If the number of prisms slowly increases, this prism will slowly approach the cylinder. The difference between a hollow prism and a hollow cylinder depends on the fact that a prism has edges, while a cylinder has no edges. The change position of its shape can be summarized as follows: the change of column end, the change of column body and the processing deformation on the ridge line of the column body. This decorative deformation, generally must be in the cylinder closed before bonding.
In the hotel design, the column or barrel structure is made on the plane paper card, which is repeatedly bent or bent. Subsequently, the edges of the folding surface are glued together to form a cylindrical shape penetrating left and right. In this basically, and then the top cover and bottom closed, you can become a column-type closed space three-dimensional modeling.
1. Column end change
The column end is also called the column head, which refers to both sides of the column in the hotel decoration design. The processing method can be to break the two sides and bend outward into a convex triangular shape. The middle position of the column mouth can also be cut, and then bent and bent outward. In addition, it can also be cut at the corner of the column, recessed into the middle to form a square table shape, or cone shape. Some can be further bent after cutting, form a number of split cylinder shapes, etc. In summary, column end changes affect the design of the column body.
2. The change of the column body
The change of column body in hotel decoration design is similar to the semi-three-dimensional design technique of kneading flour material. The cutting and folding changes can be used to carry out disciplined cutting and folding processing on the column body, and the techniques of adding shape or horizontal, vertical, oblique cutting and stretching can also be used to form a rotating body after the column body is formed, and the techniques of repetition, gradual change, contrast and the like can also be used to deal with it.
3. The change of column edge
The key to the water chestnut of the column in hotel design is the key part of the change of the column shape. On this protruding ridge line, the part of the ridge line can be changed into the shape of the inclined plane through buckling. It can also be cut, and the two cut and separated parts are recessed into the middle of the cylinder. The length and height of the recessed cut can be arranged in a gradual order to form rhythm, thus causing various changes. In addition, the position of the pillar edge can be made, unnecessary parts thereof can be cut off, and many surfaces can be additionally bent and recessed, resulting in the result of internal reduction. It varies in the following ways:
1) The circular ridge line developed along the parallel line edge of the parallel surface.
2) wavy ridge.
3) Intersecting ridges.
4) non-parallel straight ridge line.
5) A series of prismatic ridge lines formed along the prisms.
The above is the introduction of how to use the transparent column in the hotel decoration design.
